Print

Print


I've had an Epson 2000 for the last couple of years and like it a lot. I have an Epson
Stylus Photo R380 that I bought about 5 years ago which I use for cards and small prints
and it did such a nice job that I bought the 2000 for larger prints. The 380 often gets
balky when I do long runs with thick card blanks, but I've never had that problem with the
2000.   

 

Peace,

Chris 

 

 "Art is unquestionably one of the purest and highest elements in human happiness. It
trains the mind through the eye, and the eye through the mind. As the sun colors flowers,
so does art color life." ~ Sir John Lubbock 

 

  _____  

From: Cindy Shaw [mailto:[log in to unmask]] 
Sent: Saturday, July 19, 2014 3:34 PM
Subject: Re: Epson Photo R1800 replacement recommendation

 

I also have an Epson 1800 that I loved, but unfortunately got busy with other things and
didn't use it for quite a while and the inkjet noxxles got clogged. I tried following a
youtucbe video on cleaning them, but the printer has never been the same.  

 

Cindy





On Fri, Jul 11, 2014 at 6:10 AM, Lana Johnson wrote:

 

 MaryBeth, 

 

I also had my R1800 die not too long ago.  I've replaced it with the Epson R2000 but still
haven't had a chance to use it much.  It was easy to set up -- wireless -- and the few
prints I've made with it are of good quality.  The ink cartridges that came with  the
printer must have been the start up variety because I'm already getting low ink reminders.
But, as you say, I think Epson has the best quality and I just have to be resigned to the
cost of the ink. 

 

Sandy Williams 

 

www.soundofwings.com <http://www.soundofwings.com> 

   <http://www.soundofwings.com> 

   <http://www.soundofwings.com> 

   <http://www.soundofwings.com> 

-----Original Message----- 

From: MaryBeth Hinrichs < [log in to unmask]
<javascript:parent.wgMail.openComposeWindow([log in to unmask])> > 

To: SCIART-L < [log in to unmask]
<javascript:parent.wgMail.openComposeWindow([log in to unmask])> > 

Sent: Thu, Jul 10, 2014 10:55 pm 

Subject: [SCIART] Epson Photo R1800 replacement recommendation
<javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

Hello all,  <javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

My beloved Epson R1800 gave up the ghost tonight after over 7 years of wonderful and
faithful service - aaack! And my go-to in town computer/printer guru store  has closed for
good (also found that out tonight, not one of my better nights). Does anyone have
experience with the Epson replacement(s) for the R1800 - the R2000 and R3000?
<javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

   <javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

Already have vast experience with the ink cost and usage of Epson printers, just have
never been satisfied with other brands.
<javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

   <javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

Thanks much,  <javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

MaryBeth  <javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

________________________________________________
<javascript:parent.wgMail.openComposeWindow([log in to unmask])> 

Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 

http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv
<http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv> 

________________________________________________
<http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv> 

Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 

http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv
<http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv> 

   <http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv> 

________________________________________________
<http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv> 

Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 

http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv

 <http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv> 

________________________________________________

Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 
http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv


Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at
http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv