Print

Print


Kathryn,

Thank you for your explanation; it makes perfect sense to me now why you want to use masking fluid with graphite. 

Best wishes,
Gretchen 

www.gretchenhalpert.com
www.gretchenhalpert-distanceprogram.com



> On Sep 7, 2017, at 11:37 AM, Kathryn Killackey <[log in to unmask]> wrote:
> 
> Hi Everyone,
> 
> Thanks for the suggestions Linda and Stephanie. Gretchen, I have been experimenting with watercolor graphite, more for fine art purposes than scientific illustration. I'm interested in contrasting the fluid brushy marks of the watercolor graphite with the tight details you can get with a mechanical pencil. Here and here are my first two attempts. You can erase into the watercolor graphite but only to a certain extent, you can't get back your true whites or very light shades. I have been trying to use the masking fluid to reserve areas for true whites and fine detail but I don't like the changes this makes to the surface for detailed drawing. The best solution I can come up with right now is to block areas off with artist's tape and cut out shapes with an exacto.
> 
> best,
> Kathryn
> 
> 
> 
>> On Thu, Aug 31, 2017 at 3:57 PM, Gretchen Halpert <[log in to unmask]> wrote:
>> Hi Kathryn,
>> 
>> What is your purpose in using masking fluid with graphite? I am curious why erasing is not sufficient. Thanks. 
>> 
>> Sincerely,
>> Gretchen 
>> 
>> www.gretchenhalpert.com
>> www.gretchenhalpert-distanceprogram.com
>> 
>> 
>> 
>>> On Aug 31, 2017, at 1:33 PM, Kathryn Killackey <[log in to unmask]> wrote:
>>> 
>>> Hi Linda,
>>> 
>>> Where there ever any replies to this? I'd love to hear about people's experiences with this too. So far I have tried both Winsor & Newton and Grumbacher masking fluids on Arches 140lb HP and found that it roughs up the surface in a way I don't like for graphite application. Perhaps I should try 300lb paper?
>>> 
>>> best,
>>> Kathryn
>>> 
>>>> On Mon, Jan 16, 2017 at 3:57 PM, Linda Feltner <[log in to unmask]> wrote:
>>>> HI All:
>>>> I must have lost some emails. I remember someone telling me about their experience with masking fluid while working with graphite, not liquid media.
>>>> If it was any of you out there that contributed that information, could you please let me know. 
>>>> I would like to know the paper specifications, as well as the masking fluid specs and what kind of tool you used.
>>>> 
>>>> 
>>>> Thank you very much,
>>>> Linda
>>>> -- 
>>>> _____________________
>>>> Linda M. Feltner Artist LLC
>>>> Guild of Natural Science Illustrators, President
>>>> 520.803.0538
>>>> www.lindafelter.com
>>>> ________________________________________________
>>>> 
>>>> Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 
>>>> http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv
>>> 
>>> 
>>> 
>>> -- 
>>> Kathryn Killackey
>>> natural science illustrator
>>> Hamilton, ON
>>> (289) 308-6769
>>> www.killackeyillustration.com
>>> 
>>> ________________________________________________
>>> 
>>> Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 
>>> http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv
>> 
>> ________________________________________________
>> 
>> Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 
>> http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv
> 
> 
> 
> -- 
> Kathryn Killackey
> natural science illustrator
> Hamilton, ON
> (289) 308-6769
> www.killackeyillustration.com
> 
> ________________________________________________
> 
> Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at 
> http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv

Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at
http://www.gnsi.org/resources/reviews/gnsi-sciart-l-listserv