On Jul 21, 2021, at 9:52 PM, Molly4130 <[log in to unmask]> wrote:
Yes, what Britt said--but add at least another 25% on top, it always takes longer than you think it will. Medium and substrate (including preparation process and materials) are major considerations, don't underestimate those. Other key factors could be whether the piece is temporary vs permanent (if it's temporary, what will happen to it afterwards), and what hours the space is available for you to work comfortably without distractions (like answering onlooker questions). Whatever you decide, it's reasonable to get a deposit up front and then break down two or three installments for the balance based on pre-set progress points.Be clear on the approvals process, too--either they sign off on the sketch/rendering before work starts, or have predetermined reviews that could coincide with later payments. Like any other contracted creativity, managing client expectations is important--often they don't appreciate what goes into unanticipated mid-process revisions.Full disclosure: I do detailed large-format charcoal drawings on paper. While I've worked out a number of quotes for mural installation opportunities, I've never taken on a job like this because calculations like the ones above pointed to more potential for things to go sideways than I was comfortable risking. My apprehension stems not so much from the charcoal drawings, but instead from misspent youth painting scenery for theatre productions. Working big is so much fun, but leave yourself enough wiggle room that it stays fun.Good luck! All the best, MllyOn Wed, Jul 21, 2021 at 1:52 PM Griswold, Britt (GSFC-279.0)[LUSA Associates] <[log in to unmask]> wrote:Non-NU Email
You need to calculate it both ways and see what you can live with.
8 x 4 ft = 32sqft x $200/ea. = $6400
80hr x $80/hr = $6400
Plus design/research time & materials.
Obviously this will depend on how detailed you plan to make the art, and how much design and prep time, and materials and tools (scaffolding?) you need for the project. I think the above figure might be a starting point for a more general image. If this has some science accuracy to the components, you will need to go higher as it will take longer. If you are working with preexisting images you have purchased, you might be able to go a little lower, depending on the purchase rights, as it becomes more of a design job.
Also make sure you put in a 15% profit above what your cost are (you salary is a cost to the project).
Hello to all,
Part of a current project includes a mural in a space about 8 feet wide, and I am hoping those of you with experience creating murals might have advice to share on how you determine your rates for such things.
What is the most effective way to calculate what that number should be? Should it be based on square footage? My hourly rate? Plus materials? A mix of both or all?
Thanks so much in advance!
roblems: Email Lana Johnson at [log in to unmask]
Need to leave or subscribe to the Sciart-L listserv? Follow the instructions at
https://www.gnsi.org/listservList name is Sciart-L
Problems: Email Lana Johnson at [log in to unmask]